Gansu Lanzhou 46-inch LCD large-screen splicing screen alignment considerations

The splicing screen installation process is a complicated process, and the entire LCD splicing wall is well used thanks to a good installation method. Professional steps and professional staff can ensure the perfect project. The attention to detail in the alignment of the installation process of the LCD Video Wall System requires that the installer not only possess professional skills, but also be careful. The front of the LCD splicing wall is bright and clear, but behind it is covered with different types of wire. The normal operation of a LCD splicing wall involves computers, networks, image surveillance, integrated wiring, and numerous peripheral devices that cause a lot of wires behind the splicing wall. The layout of these wires will directly determine the effect of LCD video wall.

1. Under normal circumstances, pre-wiring surveys, construction personnel need to go to the scene to understand the survey.

2. It is necessary to communicate with customers in detail and plan the layout of the project, because these will largely determine the duration of the project, the control of costs, and the presentation of the final results.

3, after the investigation needs to be analyzed, usually power lines and signal lines must be separated to avoid unnecessary interference with the signal.

4. In addition, the lengths of the required cables, the number of connectors, and the names of the signal cables should be calculated based on the specifications of the LCD splicing wall, the cabinet location, and the position.

5, but also with the customer to confirm that the pipeline channel available for the project to meet the actual needs in order to continue the follow-up work. After the analysis is planned, the wiring can be done.

6, the specific operation of the wiring, you need to see the name of the wire to ensure that the corresponding correct insertion jack.

7, when the line should be fine and smooth all the wires, light and light. After the wire is finished, the corresponding wire is placed in the wire slot.