How to remove the screen smear screen surface dirt

There are many kinds of dirt on the surface of the liquid crystal splicing screen, there are dust, finger marks and oil stains that the user carelessly left, and different methods are required for different stains. If the dirt on the screen surface is careless, then It may be possible to get a screen or to erode the screen. Now teach everyone how to properly remove the screen smear screen surface dirt.

Tools / raw materials

Dedicated LCD cloth; splicing dedicated LCD screen cleaner; a soft towel drying; alcohol <br> <br> Method /

Clean the screen surface of dust. First of all, we can gently blow to the screen with the mouth, gently blowing the dust off the screen. For those parts of the dust that are not blown off, use a special LCD wipe to gently wipe the screen. When cleaning, be careful not to use force. Do not use force on the screen to wipe.

Clear the fingerprint on the screen. To clean up fingerprints on the screen, special screen cleaners and special LCD wiping cloths are needed. First, we pour a dedicated LCD splicing screen cleaner onto a special LCD wiper, and then use a dedicated LCD wiper. Fingerprint the area gently wipe, wipe clean with a dry soft towel gently wipe the screen clean.

Clean up the oil on the screen. For the use of alcohol, use a special LCD wiping cloth to dip in a little alcohol. Gently wipe gently in the oily area. Wipe clean and dry the screen with a dry towel. Can not be touched with too much alcohol, alcohol will have a certain degree of corrosion of the screen, wipe clean, be sure to immediately wipe the screen with a towel.

Precautions

The selected towel should be able to prevent static electricity. Otherwise, towel and screen friction can easily cause static electricity. Towels can easily leave a small amount of fiber or towel material on the screen.